Fujitsu PRIMERGY GX2570 M6 Upgrade And Maintenance Manual page 199

Removing the CPU
Figure 145: Removing the CPU
▶ Pull the lever to lift up the CPU.
▶ Remove the LC heat sink from the CPU frame.
▶ Clean residual thermal paste from the CPU surface and the LC heat sink
surface using a lint-free cloth and store the CPU in a save place.
CAUTION
CPUs are extremely sensitive to electrostatic discharge and therefore
must always be handled with care.
▶
After a CPU has been removed from its protective sleeve or from
its socket, place it upside down on a nonconducting, antistatic
surface.
▶
Never push a CPU over a surface.
GX2570 M6 Upgrade and Maintenance Manual
Liquid cooling (LC)
199