Liquid cooling (LC)
At least two people are needed to install the LC kit.
Preliminary steps
▶
"Locating the defective server" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶
"Removing the CPU node" on page
▶
"Removing the air duct" on page
▶
"Removing the cross bar" on page
Removing the LC kit
Figure 138: Removing the screws
▶ Remove the two screws of the tube holder (see circles).
194
40.
49.
62.
63.
Upgrade and Maintenance Manual
39.
40.
41.
GX2570 M6