Concluding steps
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If replacing an OCP module with an OCP module with different number of
ports (e.g. 2-port to 4-port):
▶ Configure the additional MAC addresses in the OS, if you have no eIOV
(ehanced IO Virtualization) installed. If you have eIOV installed, it is not
necessary to configure the MAC address. This is virtualized by eIOV.
▶ Inform the customer about these MAC addresses, see
MAC address of a LAN controller" on page
▶
"Updating the NIC configuration file in a Linux environment" on page
▶ Inform the customer about these MAC addresses, see
MAC address of a LAN controller" on page
GX2570 M6
Expansion cards and riser modules
48.
49.
Upgrade and Maintenance Manual
"Looking for the
76.
"Looking for the
76.
74.
153