System board and components
Figure 200: Removing the system board (B)
▶ Use both hands to lift the system board carefully out of the chassis.
CAUTION
▶
Always take the system board with both hands!
▶
Never lift the system board one-sided or at a heat sink,
because the solder connections between the socket and the
system board come under tension and increase the risk of
damage and malfunction!
▶
Do not damage the EMI springs which are essential to comply
with applicable EMC regulations and satisfy cooling
requirements and fire protection measures.
▶ Place the removed and the new system board on an antistatic surface.
Installing the new system board
▶ Check the settings on the new system board, see
page
271.
248
Upgrade and Maintenance Manual
"Onboard settings" on
GX2570 M6