Table of Contents
Advertisement
Memory modules
NOTE:
Primary and expansion memory is installed in a side-by-side configuration in the bottom of the
computer.
If only one memory module is installed, it must be installed in the socket labeled 1.
Table 5-3
Memory module descriptions and part numbers
Description
4 GB (DDR-2666)
8 GB (DDR-2666)
16 GB (DDR-2666)
IMPORTANT:
at www.hp.com.
Before removing the memory module, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover (see
3.
Disconnect the battery cable from the system board (see
Remove the memory module:
1.
Spread the retaining tabs (1) on each side of the memory module slot to release the memory module.
(The edge of the module opposite the slot rises away from the computer.)
Before adding new memory, make sure you update the computer to the latest BIOS, available
Bottom cover on page
(Preparation for disassembly on page
32).
Battery on page
Spare part number
L10598-850
937236-850
937438-850
32).
45).
Component replacement procedures
35
Advertisement
Table of Contents
