Memory Modules - HP ZBook Power G10 Maintenance And Service Manual

IMPORTANT:
information. To prevent loss of information, save your work or shut down the computer through
Windows before you remove the battery.
Remove the battery:
1. Disconnect the battery cable (1) from the system board.
2. Remove the six Phillips M2.0 × 4.0 screws (2) that secure the battery to the top cover.
3. Remove the battery (3).
To insert the battery, reverse the removal procedures.

Memory modules

To remove the memory modules, use this procedure and illustration.
Table 5-3 Memory module descriptions and part numbers
Description
32 GB
16 GB
8 GB
Before removing the memory, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
If you are replacing a memory module, remove the existing memory module:
40 Chapter 5 Removal and replacement procedures for authorized service provider parts
Removing a battery that is the sole power source for the computer can cause loss of
Bottom cover on page
Preparation for disassembly on page
37).
Battery on page
Spare part number
N50075-002
N38627-002
N37792-002
37).
39).