The Former Procedure Of Removing The Low-Voltage Power Supply Pcb; Removing The Low-Voltage Power Supply Pcb - Canon LBP5000 Series Service Manual

Chapter 3
8) Remove the low-voltage power supply PCB [1].
- 4 screws [3]
3.2.15.3 The former procedure of Removing the Low-
Voltage Power Supply PCB
LBP5000
1) Remove the delivery tray. (page 3-7)Reference[Removing the Delivery
Tray]
2) Remove the rear cover. (page 3-2)Reference[Removing the Rear Cover]
3) Remove the right cover/right
3)Reference[Removing the Right Cover/Right Cassette Cover]
4) Remove the upper cover. (page 3-5)Reference[Removing the Upper
Cover]
5) Remove the left cover/left
4)Reference[Removing the Left Cover/Left Cassette Cover]
6) Remove the face-down cover. (page 3-7)Reference[Removing the Face-
Down Cover]

3.2.15.4 Removing the Low-Voltage Power Supply PCB

LBP5000
1) Remove the rear upper plate [1].
- 4 screws [2]
2) Remove the 9 connectors [1], and free the cable from the cable guide.
3) Remove the cable guide [1].
3-18
F-3-120
F-3-121
cassette cover.
(page
cassette cover.
(page
F-3-122
F-3-123
- 2 claws [2]
4) Slide the cable guide [1] to the left to detach.
5) Disconnect the 3 connectors [1].
0011-1007
3-
3-
6) Remove the 3 harness retainers [1], and remove the cable.
0010-7037
7) Free the cable from the cable guide [1].
8) Remove the low-voltage power supply PCB [1].
- 1 connector [2]
- 4 screws [3]
F-3-124
F-3-125
F-3-126
F-3-127
F-3-128