The Former Procedure Of Removing The Manual Feeder Paper Sensor; Removing The Manual Feeder Paper Sensor; Registration Before Sensor; Preparation For Removing The Registration Sensor - Canon LBP5000 Series Service Manual

Table of Contents

Advertisement

2) Remove the manual feed paper sensor [1].
- 1 connector [2]
- 2 claws [3]
3.5.6.3 The former procedure of removing the Manual
Feeder Paper Sensor
LBP5000
1) Remove the delivery tray. (page 3-7)Reference[Removing the Delivery
Tray]
2) Remove the rear cover. (page 3-2)Reference[Removing the Rear Cover]
3)
Remove
the
right
cover/right
3)Reference[Removing the Right Cover/Right Cassette Cover]
4) Remove the upper cover. (page 3-5)Reference[Removing the Upper
Cover]
5)
Remove
the
left
cover/left
4)Reference[Removing the Left Cover/Left Cassette Cover]
6) Remove the front cover. (page 3-6)Reference[Removing the Front
Cover]
7) Remove the ETB unit. (page 3-27)Reference[Removing the ETB Unit]

3.5.6.4 Removing the Manual Feeder Paper Sensor

LBP5000
1) Remove the sensor cover [1].
- 2 claws [2]
2) Remove the manual feeder paper sensor [1].
- 1 connector [2]
- 2 claws [3]
F-3-228
F-3-229
cassette
cover.
(page
cassette
cover.
(page
F-3-230

3.5.7 Registration Before Sensor

3.5.7.1 Preparation for Removing the Registration
Sensor
LBP5100
1) Remove the delivery tray. (page 3-7)Reference [Removing the Delivery
Tray]
2) Detach the rear cover. (page 3-2)Reference [Removing the Rear Cover]
3) Detach the right cover. (page 3-2)Reference [Removing the Right Cover
/ Right Cassette Cover]
4) Detach the upper cover. (page 3-5)Reference [Removing the Upper
Cover]
5) Detach the left cover. (page 3-4)Reference [Removing the Left Cover /
Left Cassette Cover]
6) Detach the front cover. (page 3-5)Reference [Removing the Front
Cover]
7) Remove the ETB unit. (page 3-26)Rerefence [Removing the ETB Unit]

3.5.7.2 Removing the Registration Sensor

LBP5100
0011-1033
1) Remove the sensor cover [1].
- 2 claws [2]
3-
3-
0011-0115
2) Remove the registration sensor [1].
- 1 connector [2]
- 2 claws [3]
3.5.7.3 The former procedure of removing the
Registration Sensor
LBP5000
1) Remove the delivery tray. (page 3-7)Reference[Removing the Delivery
Tray]
2) Remove the rear cover. (page 3-2)Reference[Removing the Rear Cover]
Chapter 3
F-3-231
F-3-232
F-3-233
0015-7595
0015-7596
0011-1034
3-33

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lbp5100 seriesLbp5000Lbp5100

Table of Contents