Table of Contents
Advertisement
- 1 bushing [2]
- 1 spring [3]
- 1 gear [4]
- 1 bushing [5]
5) Remove the ETB drive cum [1].
- 1 E-ring [2]
6) Detach the connector cover [1].
- 2 claws [2]
7) Remove the pickup feeding assembly [1].
- 1 connector [2]
- 4 screws [3]
F-3-198
F-3-199
F-3-200
F-3-201
F-3-202
3.5.1.3 The former procedure of removing the Pickup/
Transport Assembly
LBP5000
1) Remove the delivery tray. (page 3-7)Reference[Removing the Delivery
Tray]
2) Remove the rear cover. (page 3-2)Reference[Removing the Rear Cover]
3)
Remove
the
right
cover/right
3)Reference[Removing the Right Cover/Right Cassette Cover]
4) Remove the upper cover. (page 3-5)Reference[Removing the Upper
Cover]
5)
Remove
the
left
cover/left
4)Reference[Removing the Left Cover/Left Cassette Cover]
6) Remove the front cover. (page 3-6)Reference[Removing the Front
Cover]
7) Remove the ETB unit. (page 3-27)Reference[Removing the ETB Unit]
8) Remove the high-voltage power supply PCB. (page
20)Reference[Removing the High-Voltage Power Supply PCB]
9) Remove the memory controller PCB. (page 3-16)Reference[Removing
the Memory Controller PCB]
3.5.1.4 Removing the Pickup/Transport Assembly
LBP5000
1) Remove the plate [1].
- 1 screw [2]
2) Remove the pickup motor plate [1].
- 5 screws [2]
3) Remove the gears.
- 1 claw [1]
- 1 bushing [2]
- 1 spring [3]
- 1 gear [4
- 1 bearing [5]
Chapter 3
F-3-203
cassette
cover.
(page
cassette
cover.
(page
F-3-204
F-3-205
0011-1027
3-
3-
3-
0011-0109
3-29
Advertisement
Table of Contents
