Video Controller Pcb; Preparation For Removing The Video Controller Pcb; Removing The Video Controller Pcb; The Former Procedure Of Removing The Video Controller Pcb - Canon LBP5000 Series Service Manual

Chapter 3
2) Remove the DC controller PCB [1].
- 4 flat cables [2]
- 11 connectors [3]
- 4 screws [4]

3.2.12 Video Controller PCB

3.2.12.1 Preparation for Removing the Video Controller
PCB
LBP5100
1) Remove the delivery tray. (page 3-7)Reference [Removing the Delivery
Tray]
2) Detach the rear cover. (page 3-2)Reference [Removing the Rear Cover]
3) Detach the right cover. (page 3-2)Reference [Removing the Right Cover
/ Right Cassette Cover]

3.2.12.2 Removing the Video Controller PCB

LBP5100
1) Remove the rear plate [1].
- 11 screws [2]
2) Remove the video controller PCB [1].
- 1 connector [2]
- 2 flat cables [3]
- 4 screws [4]
3-14
F-3-93
F-3-94
F-3-95
When replacing the video controller PCB, make sure to remove the NVRAM
(ICS1) [1] from the old PCB and mount it to the new one.
0015-7569
0015-7570
3.2.12.3 The former procedure of removing the Video
Controller PCB
LBP5000
1) Remove the delivery tray. (page 3-7)Reference[Removing the Delivery
Tray]
2) Remove the rear cover. (page 3-2)Reference[Removing the Rear Cover]
3) Remove the
3)Reference[Removing the Right Cover/Right Cassette Cover]

3.2.12.4 Removing the Video Controller

LBP5000
1) Remove the rear plate [1].
- 11 screws [2]
F-3-96
F-3-97
F-3-98
right cover/right cassette cover.
0011-1000
(page 3-
0011-0113