Table of Contents
Advertisement
5) Remove the plate [1].
- 1 screw [2]
6) Remove the pickup motor plate [1].
- 5 screws [2]
7) Remove the gears.
- 1 claw [1]
- 1 bearing [2]
- 1 spring [3]
- 1 gear [4]
- 1 bearing [5]
8) Remove the ETB drive cam [1].
- 1 E-ring [2]
9) Lower the left/right ETB locking lever [1].
F-3-70
F-3-71
F-3-72
F-3-73
F-3-74
10) Remove the bearing [1].
11) Remove the gear [1].
12) Remove the main drive assembly [1].
- 8 screws [2]
The main drive assembly requires adjustment after assembly. In other words,
it must not be disassembled in the field
Notes for installing the main drive assembly
If the CRG coupling arm is disengaged at disassembly of the main drive as-
sembly, be sure to mount the arm [1] under the protruding parts [2] on the
Chapter 3
F-3-75
F-3-76
F-3-77
F-3-78
F-3-79
3-11
Advertisement
Table of Contents
