The Former Procedure Of Removing The; Removing The - Canon LBP5000 Series Service Manual

Chapter 3
3) Remove the boss [1], and remove the bushing [2] and the arm [3] by
rotating the bushing.
4) Disconnect the claw [1].
5) Remove the shaft [1] by sliding it in the direction of the arrow.
6) Detach the front cover [1].
3.2.5.3 The former procedure of removing the Front
Cover
LBP5000
3-6
F-3-30
F-3-31
F-3-32
F-3-33
F-3-34
1) Remove the delivery tray. (page 3-7)Reference[Removing the Delivery
Tray]
2) Remove the
3)Reference[Removing the Right Cover/Right Cassette Cover]
3) Remove the upper cover. (page 3-5)Reference[Removing the Upper
Cover]
4) Remove the
4)Reference[Removing the Left Cover/Left Cassette Cover]
3.2.5.4 Removing the Front Cover
LBP5000
1) Open the front cover.
2) Lift the ETB unit [1] slightly, and pick the link arm [2] to detach the shaft
of the arm.
3) Lift the ETB unit [1] slightly, and pick the link arm [2] to detach the shaft
of the arm.
4) Put the ETB back into the machine.
5) Remove the boss [1], and rotate the bearing [2] to detach the bushing and
the arm [3].
6) Remove the boss [1], and rotate the bearing [2] to detach the bearing and
the arm [3].
0011-1040
7) Remove the claw [1].
right cover/right cassette cover.
left cover/left cassette cover.
F-3-35
F-3-36
F-3-37
F-3-38
(page 3-
(page 3-
0010-6470