Duplexing Feed Motor; Preparation For Removing The Duplexing Feed Motor; Removing The Duplexing Feed Motor; Removing The Duplexing Reversing Motor - Canon i-SENSYS LBP5300 Series Service Manual

Chapter 3
3) Remove the duplexing feed roller [1] in the direction of the arrow.
4) Remove the duplexing reversing assembly [1].
- 2 screws [2]
5) Remove the duplexing reversing drive assembly [1].
- 2 screws [2]
6) Remove the duplexing reversing motor [1].
- 2 screws [2]
3-24
F-3-174
F-3-175
F-3-176
F-3-177
F-3-178

3.4.10 Duplexing Feed Motor

3.4.10.1 Preparation for Removing the Duplexing Feed
Motor
/ i-SENSYS LBP5360 / i-SENSYS LBP5300
1) Detach the rear cover. (page 3-1)[Removing the Rear Cover]
2) Remove the fixing assembly. (page
Assembly]
3) Detach the upper cover. (page 3-2)[Removing the Upper Cover]
4) Detach the right cover. (page 3-1)[Removing the Right Cover]
5) Detach the left cover. (page 3-1)[Removing the Left Cover]
6) Remove the control panel. (page 3-7)[Removing the Control Panel]

3.4.10.2 Removing the Duplexing Feed Motor

/ i-SENSYS LBP5360 / i-SENSYS LBP5300
1) Disconnect the connector [1].
2) Detach the plate [1].
- 3 screws [2]
3) Remove the duplexing delivery drive assembly [1].
- 3 screws [2]
4) Remove the duplexing feed motor [1].
- 2 screws [2]
3-25)[Removing the Fixing
F-3-179
F-3-180
F-3-181
0014-4852
0014-4853