Table of Contents
Advertisement
•
To connect the CSP outlet ports to the lube points
on the ProMix PD pump cartridges.
See Table 1: CSP Valve Port Usage for CSP valve
fitting connections and Parts, page 16, for PD lube point
connections.
The ProMix PD pump upper and lower throat cartridges
(F
. 5 and the parts diagram on page 16) have three
IG
ports:
8
7
F
. 5: Plumbing Locations
IG
3A8597B
1. Install one of the push-to-connect 10-32 fittings (10)
2. Install one of the barb fittings (17) for the fluid line
3. Plug the third port with the provided screw plug (15)
Provide a waste container and adequately secure all
routed fluid lines.
10
17
18
for the TSL fluid line from the CSP valve (8).
(18) out to the waste container.
and gasket (16).
Upper and lower throat
cartridge
Installation
Waste container
11
Advertisement
Table of Contents
