Table of Contents
Advertisement
Expansion Kit Installation
1. Remove the original base system CSP Valve from
the system. It will no longer be used.
2. Install the new higher quantity outlet CSP Valve in
place of the original CSP Valve. This provides the
total quantity of outlets required for the system.
3. Follow the Installation, page 7, and Plumbing,
page 10, sections of this manual to add the PD Rod
Guards and the additional catalyst pumps, and to
complete the additional plumbing for each PD
pump.
4. Prime and adjust the G3 Pro timer settings for the
additional lube points, as needed, to maintain an
appropriate fresh supply of TSL lubrication to each
PD pump throat cup area.
Technical Specifications
See also the G3 Pro Automatic Lubrication Pump and CSP Valve manuals.
ProMix PD Proportioner Platform TSL Auto Lube System
Maximum fluid working pressure
Maximum free-flow delivery
Noise (dBa)
Maximum sound pressure
Materials of Construction
Wetted materials on all models
Notes
All trademarks or registered trademarks are the property of their respective owners.
California Proposition 65
CALIFORNIA RESIDENTS
WARNING: Cancer and reproductive harm – www.P65warnings.ca.gov.
3A8597B
Accessories
Part
Kits
206996 Fluid, TSL, 1 Gallon
206995 Fluid, TSL, 1 Quart
US
600 psi
0.25 cubic in./min
See the G3 Pro Automatic Lubrication Pump and
CSP Valve manuals.
Additional kit component wetted parts:
Zinc-plated carbon steel, nickel-plated carbon steel, bronze,
brass, nickle-plated brass, 303 SST, 316 SST, nylon,
polyurethane, nitrile rubber (buna-N), Viton, Acetal
Metric
4.14 MPa, 41.4 bar
4 cc/min
<60 dB
Parts
19
Advertisement
Table of Contents
