Recording A Backcountry Skiing Or Snowboarding Activity; Cross-Country Skiing Power Data; Golfing; Playing Golf - Garmin D2 MACH 1 STANDARD Owner's Manual

snowboarding. It automatically records new ski runs when
you start moving down hill.
1 Start a skiing or snowboarding activity.
2 Hold MENU.
3 Select View Runs.
4 Press UP and DOWN to view details of your last run,
your current run, and your total runs.
The run screens include time, distance traveled,
maximum speed, average speed, and total descent.

Recording a Backcountry Skiing or Snowboarding Activity

The backcountry skiing or snowboarding activity lets you
switch between climbing and descending tracking modes
so you can accurately track your statistics. You can
customize the Mode Tracking setting to automatically
or manually switch tracking modes
Settings, page 23).
1 From the watch face, press START.
2 Select Backcountry Ski or Backcountry Snowboard.
3 Select an option:
• If you are starting your activity on a climb, select
Climbing.
• If you are starting your activity moving downhill,
select Descending.
4 Press START to start the activity timer.
5 If necessary, press LAP to switch between climbing
and descending tracking modes.
6 After you complete your activity, press STOP, and
select Save.

Cross-Country Skiing Power Data

NOTE: The HRM-Pro series accessory must be paired to
the D2 Mach 1 watch using ANT+ technology.
You can use your compatible D2 Mach 1 watch paired
with the HRM-Pro series accessory to provide real-time
feedback about your cross-country skiing performance.
The power output is measured in watts. Factors that
affect power include your speed, elevation changes, wind,
and snow conditions. You can use power output to
measure and improve your skiing performance.
NOTE: Skiing power values are generally lower than
cycling power values. This is normal and occurs because
humans are less efficient at skiing than they are at
cycling. It is common for ski power values to be 30 to
40 percent lower than cycling power values at the same
training intensity.

Golfing

Playing Golf

Before you play golf, you should charge the watch
(Charging the Watch, page 77).
1 From the watch face, press START.
2 Select Golf.
The device locates satellites, calculates your location,
and selects a course if there is only one course nearby.
18
(Activities and App
3 If the course list appears, select a course from the list.
4 If necessary, set your driver distance.
5 Select to keep score.
6 Select a tee box.
The hole information screen appears.
Current hole number
Distance to the back of the green
Distance to the middle of the green
Distance to the front of the green
Par for the hole
Map of the green
Driver distance from the tee box
NOTE: Because pin locations change, the watch
calculates the distance to the front, middle, and back
of the green, but not the actual pin location.
7 Select an option:
• Tap the front, middle, or back distances to the green
to view the PlaysLike distance
Icons, page 19).
• Tap the map to view more detail or measure
distance with touch targeting
with Touch Targeting,
• Press UP or DOWN to view the location and distance
to a layup or to the front and back of a hazard.
• Press START to open the golf menu
page 18).
When you move to the next hole, the watch automatically
transitions to display the new hole information.

Golf Menu

During a round, you can press START to access additional
features in the golf menu.
End Round: Ends the current round.
Change Hole: Allows you to manually change the hole.
Change Green: Allows you to change the green when
more than one green is available for a hole.
(PlaysLike Distance
(Measuring Distance
page 19).
(Golf Menu,
Activities and Apps