Using The Teleparameter Feature To Adjust The System Setup - Comdial DX-80 Manual

Hard drive voice mail

Hide thumbs Also See for DX-80:

Table of Contents

DX-80 H

2.6.3 Using the Teleparameter Feature to Adjust the System

Setup

You can use the Teleparameter feature to adjust the system setup at any time. It is not

necessary to bring down the system to make modifications. To use the Teleparameter feature

to adjust information, follow steps 1 through 4 in the procedure in section 2.6.1. For specific

parameters you can adjust, refer to section 2.6.1.

Note:

If you enter a parameter number for a parameter that affects a particular

box, the system prompts you to enter the Item number. The Item number

identifies the particular box in which you want to change the parameter. At

the Item number prompt, enter the number of the box.

Be advised that many day-to-day modifications that must be made to the system (adding

mailboxes, changing system greetings, making call routing modifications) can be done by

calling into the supervisor mailbox and selecting options from the Supervisor menu. By

using Supervisor menu options, you do not need to refer to specific parameter numbers and

values. For information on day-to-day modifications that can be made using Supervisor

menu options (and not the Teleparameter feature), refer to section 3.

ARD

RIVE

OICE

AIL

NSTALLATION AND

UPERVISOR

09/01

UIDE

Table of Contents