Connecting The Laptop To The Dx-80 Hard Drive Voice Mail - Comdial DX-80 Manual

DX-80 H
2. From the Start button, choose Programs, then Windows Explorer.
3. On the All Folders side of the Exploring screen, select the diskette drive (typically A:).
4. Double-click on
5. Follow the prompts to install the remote software. When prompted to indicate the
directory in which you want to install Serial Administration files, accept the default
directory. Accept program default setup selections whenever possible.
6. When prompted, remove installation diskette #1 and insert diskette #2. Press OK. If the
operating system on the laptop is Windows NT, after you remove diskette #1, you will
receive an error message asking you to re-insert the disk. Instead, insert diskette #2, press
the Retry button on the error message, and then select the Continue button.
7. When prompted, remove installation diskette #2 and insert diskette #3. Press OK. If the
operating system on the laptop is Windows NT or Windows 2000, after you remove
diskette #2, you will receive an error message asking you to re-insert the disk. Instead,
insert diskette #3, press the Retry button on the error message box, and then select the
Continue button.
8. When the Setup Complete screen appears, press Finish. A Serial Administration icon
displays on the desktop.
2.4.2 Connecting the Laptop to the DX-80 Hard Drive Voice
Mail
You connect the Voice Mail card to the laptop computer using a Straight through serial cable.
NOTE: Before connecting the Straight through cable between the Voice Mail and
the laptop, connect power to the Voice Mail and allow it to power up for 3
minutes or more. After 3 minutes, connect the Straight through cable
between the laptop and the Voice Mail, then attempt to establish
communication using the procedure provided below.
When you install KeyLink or serial administration software on the laptop computer, the
program defaults to using the COM 1 port on the laptop. Therefore, unless you change this
D V M
ARD RIVE OICE AIL
. from the right side of the Exploring screen.
SETUP EXE
I S
NSTALLATION AND UPERVISOR
16
G 09/01
UIDE