Creating And Adjusting Mailbox Box Information - Comdial DX-80 Manual

DX-80 H
record the necessary greetings for these boxes. Sample Routing box greetings are provided in
section 3.2.1.
To record Routing box greetings, follow the procedure provided in section 3.2.2.
To modify single-digit call routing, you can follow the procedure in section 3.2.3 or you can
use the Teleparameter feature. To use the Teleparameter feature, follow steps 1 through 4 in
the previous procedure, referring to the parameter numbers provided in section 2.6.2.
Note: If you enter a parameter number for a parameter that affects a particular
box, the system prompts you to enter the Item number. The Item number
identifies the particular box in which you want to change the parameter. At
the Item number prompt, enter the number of the box.
Note: Refer to section 2.6.2 for information on values you can specify for certain
parameters and for information on adjusting parameters in the VM.CFG file.

2.6.1.4 Creating and Adjusting Mailbox Box Information

To create mailboxes on the system, follow the procedure in section 3.1.1. Once you create
mailboxes, you can make detailed modifications to the box setups using the Teleparameter
feature. To use the Teleparameter feature to adjust mailbox information in boxes you have
created on the system, follow steps 1 through 4 in the procedure in section 2.6.1.2. For
specific parameters you can adjust, refer to section 2.6.2.
Note: If you enter a parameter number for a parameter that affects a particular
box, the system prompts you to enter the Item number. The Item number
identifies the particular box in which you want to change the parameter. At
the Item number prompt, enter the number of the box.
Note: Refer to section 2.6.2 for information on values you can specify for certain
parameters and for information on adjusting parameters in the VM.CFG file.
D V M I
ARD RIVE OICE AIL
S
NSTALLATION AND UPERVISOR
52
G 09/01
UIDE