Adjusting Routing Box Information - Comdial DX-80 Manual

DX-80 H
3. The system voices the Main menu:
"To listen to your messages press 1. To send a message press 2. To change your options
press 3."
4. To access the Supervisor menu, press 6 (this option is not voiced). The system voices
the Supervisor menu options:
5. From the Supervisors menu, press 9 to modify system parameters. The system prompts
you to enter the Technician password. By default, this password is 1234.
6. At the prompt, enter the number of the parameter you want to change, then, as prompted,
the value to which you want to change the parameter. Parameter information is provided
in a comprehensive table shown in section 2.6.2.
When you complete all modifications, press # to return to the Supervisor's menu.
Note: Refer to section 2.6.2 for information on values you can specify for certain
parameters and for information on adjusting parameters in the VM.CFG file.

2.6.1.3 Adjusting Routing Box Information

As indicated in section 2.4.5.2, you need to adjust Routing Boxes 800, 801, and 821 to
include any single-digit call routing options you want to provide to callers. You must also
D V M
ARD RIVE OICE AIL
Supervisor Menu
For Mailbox Administration
For Routing Box Administration
For Question Box Administration
For Port Administration
To Change the System Broadcast Message
To Change the Voice Mail Day / Night Service
To Change the System Time
To Change the System Date
To Modify System Parameters
I S
NSTALLATION AND UPERVISOR
51
G 09/01
UIDE
Press 1
Press 2
Press 3
Press 4
Press 5
Press 6
Press 7
Press 8
Press 9