Accessing System Information Screens; Setting Up The General Information Screen - Comdial DX-80 Manual

DX-80 H
Note: Because the default information on System Information screens is set so the
Voice Mail is operational with as few changes as possible, the procedures
provided in this document for entering data on System Information screens
do not go into detail about all the screen entries. Instead, the procedures
guide you through accessing and reviewing pertinent fields on certain
screens, so you can verify that default data is properly set and modify it if
absolutely necessary.
Note that you can access online help at any time by pressing <F1>.

2.4.4.1 Accessing System Information Screens

1. From the Line Status screen, press <F10>. The Main menu displays, and you are
prompted to enter a system password.
2. At the prompt to enter the system password, press <Enter>. (The default Customer level
password is blank. The default Technician level password is 1234.)
3. From the Main Menu, select
displays.

2.4.4.2 Setting Up the General Information Screen

1. From the System Information menu, select
screen displays.
2. Press <Enter> to move the cursor to the
the time at which the Voice Mail should exit to DOS to perform its auditing functions.
The default setting is 3:00
3. To save the information and exit the screen, press <F10>. The System Information
menu displays.
D V M I
ARD RIVE OICE AIL
SYSTEM INFORMATION
.
AM
S
NSTALLATION AND UPERVISOR
. The System Information menu
. The General Information setup
GENERAL
AUTOMATICALLY EXIT TO DOS AT
20
G 09/01
UIDE
field. Enter