Setting Up Prototype Mailbox 9994 - Comdial DX-80 Manual

DX-80 H
5. Repeat steps 2 through 5 to set up Routing box 821. In step 2, type 821 (instead of 800)
to access box 821. In the
same entries as you did on the setup screen for box 800.
6. Repeat steps 2 through 5 to set up Routing box 801. In step 2, type 801 (instead of 800)
to access box 801. In the
simply not include the single-digit dialing options, since this box will control how calls
are routed when the office is closed. If you choose to use the same single-digit dialing
options, simply re-enter them here.
7. To save all setup entries and exit the Routing Box setup screen, press <F10>. The Box
Information menu displays.

2.4.5.5 Setting Up Prototype Mailbox 9994

You need to create a mailbox for each subscriber who will use the system to record messages.
Since most of the setup information will be the same for every mailbox you need, you should
review the system's prototype mailbox, which is used as the mailbox setup model. The
prototype mailbox is box number 9994. Every time you select to create a new mailbox, the
system does so by making a copy of mailbox 9994.
1. From the Box Information menu, select
with the Page Number menu.
2. Press <F4> to access the box selection screen. A small window displays prompting you
for the box number. Type 9994 then press <Enter>.
3. Press <Enter> to move the cursor to the
the mailbox, the first action taken is to transfer the call to the number specified in the
field. The Voice Mail offers several options as to how the call can be transferred. When
you move the cursor to this field, the various options are presented in a menu.
All transfer type options are described below. Use this information to select a transfer
type. Note that in almost all system setups, you should select the Blind transfer type so
the system can function most efficiently. The default setting is Blind.
D V M I
ARD RIVE OICE AIL
DESTINATION FOR DIGITS
DESTINATION FOR DIGITS
S
NSTALLATION AND UPERVISOR
field, we recommend you make the
field, you may decide to modify or
. The Mail Box setup screen displays
MAIL BOX
TRANSFER TYPE
33
G 09/01
UIDE
field. When a call is routed to
:
TO