Using The Teleparameter Feature To Set Up A New System; Adjusting System Information - Comdial DX-80 Manual

DX-80 H
to set the parameter. The screen illustrations and parameter value table provided in this
section indicate the parameters and their associated codes.
Technicians who have experience setting up Corporate Office or Small Office systems may
prefer to use the Teleparameter feature to quickly make modifications and get the Voice Mail
up and running at the customer's site. Be advised, however, that since this technique
involves inputting codes that represent system parameters and corresponding values to which
parameters are to be set, it is a bit more difficult to use effectively if you are unfamiliar with
setting up Corporate Office or Small Office systems. For this reason, we recommend that
technicians unfamiliar with Corporate Office, Small Office, or DX-80 Hard Drive Voice Mail
attach a laptop to the Voice Mail and use the instructions provided in the previous sections to
complete all necessary system setup steps.
Note: If you choose to set up the system using the Teleparameter feature, be sure
to first review this section so you clearly understand the setup of the default
database included on the Voice Mail.
2.6.1 Using the Teleparameter Feature to Set up a New
System

2.6.1.1 Adjusting System Information

The Voice Mail voice processing software is pre-installed on the Voice Mail card before it is
shipped to you; however, you may need to customize certain fields on the System
Information screens. To do so, use the following procedure:
1. From a telephone, call into the extension associated with the second voice mail port
and log into supervisor mailbox 70. Note that the default password for the mailbox is
the same as the mailbox number, 70.
2. The Voice Mail tutorial session starts. Complete the tutorial. When prompted to record
the name and greeting, you may elect to identify this as the supervisor mailbox. When
changing the password, be sure to inform the system supervisor of the number you select.
When you complete the tutorial, press <*> to prevent it from voicing the next time the
box is accessed.
D V M I
ARD RIVE OICE AIL
S
NSTALLATION AND UPERVISOR
50
G 09/01
UIDE