Customizing The System Supervisor Mailbox - Comdial DX-80 Manual

DX-80 H
4. Confirm that the
allows subscribers to create up to 4 personal distribution lists in their mailboxes, which
they can then use when sending messages to groups of subscribers.
5. Repeat steps 1 through 9 to customize each mailbox you created for each subscriber on
the system. Once you customize all subscriber mailboxes, continue with the next
procedure.

2.4.5.8 Customizing the System Supervisor Mailbox

1. To access the system supervisor mailbox, press <F4>. A small window displays
prompting you for the box number. Type 70 then press <Enter>.
2. Press <Enter> to move the cursor to the
field. Press <Enter> to move the cursor to the
last name . Note that though you may type any name or words in these fields, using these
entries identifies this mailbox as the supervisor mailbox and identifies the individual who
is currently acting as the on-site system supervisor.
D V M
ARD RIVE OICE AIL
field is set to Yes for all four personal distribution lists. This
ENABLED
I S
NSTALLATION AND UPERVISOR
field. Type SUPERVISOR in this
FIRST NAME
field. Enter the system supervisor's
LAST
44
G 09/01
UIDE