Table of Contents
Advertisement
7. Drivers
7.1 Overview
The following drivers are supplied for this terminal. Install them as required for operation.
Driver
System driver
Clock control driver
Hardware window
manager
Keypad driver
PenMouse driver
Virtual keyboard
driver
System library
Display driver
For information about the drivers associated with MS-DOS refer to the MS-DOS reference manual
or other technical reference documents published separately by third party.
File name
SYSDRV.SYS
TIME.SYS
HWWMAN.EXE
KEYPAD.EXE
PENMOUSE.DRV
VKD.386
SYSCALL.DLL
VGA_C.DRV
VGA_NC.DRV
95
Purpose
Driver required to operate the system. This driver
must be installed.
Executes the process that restores the clock
condition at a resume-boot in cooperation with
POWER.EXE. This driver must be installed.
Driver that controls the hardware window. It is
called from the keypad driver.
Driver that adds the keypad function to the system.
This driver is called from applications via the
keypad library.
Driver to simulate the Microsoft mouse driver
operation on the touch panel.
Driver that enables access to the keyboard
controller. It is installed automatically by the
installer.
This library can be called by application program
or utility which use the library.
Display driver for Windows that can meet the size
of display, 192 x 384 dots. Two types of the
display driver are available, one to display mouse
cursor and the other not to display the cursor. It is
installed automatically by the installer.
Advertisement
Chapters
Table of Contents
