Disk - Casio IT-2000W Technical Reference Manual

2.3.4 Disk

Types of Disk
Type
RAM disk
Basic drive
F-ROM disk
PC card
Note:
The drive name of the PC card varies for each model. For more information refer to Chapter 2.1.3
"Drive Configuration".
RAM Disk
Part of the main RAM can be assigned on the RAM disk using System Menu.
The contents of the RAM disk will not be erased if the power switch is turned on and off, since they
are backed-up by the main battery and the sub-batteries. The contents of the RAM disk are not
affected by pressing the RESET switch either. Since this RAM disk permits the use of INT13h, it
can be used as the built-in fixed disk. Its drive name is A.
Note:
Since the RAM disk shares part of the main memory installed in the main unit, a large-RAM disk
size may affect the operation of application programs.
Basic Drive
Part of the DINOR FLASH ROM is used as the basic drive. It cannot be written to.
Disk capacity : 768 KB
Since the basic drive supports the INT13h (Read Only) interrupt, it can be used as the built-in fixed
drive. Its drive name is C.
Drive name
A 0 to 1920 Kbytes
C 768 Kbytes
D 0, 4, 8, 12, 16 or 24 Mbytes
G or F SRAM card, ATA card
40
Capacity