Casio IT-2000W Technical Reference Manual page 286

WINST.INF
The WINST.INF file is used to make installation procedure specifications for WINST.EXE. The
method used to write the WINST.INF file is the same as that used for the INI file in MS-Windows.
For information about each setup item refer to the following table.
Setup Section
CopyOriginal=
yes or no
ModifyInternationa
l=yes or no
UpdateDrivers=yes
or no
UseMouseCursor=
yes or no
ShellInstall=
yes or no
[Intl] section
Country=Setting
Language=Setting
If set to "yes", a Windows directory is created in the D drive, and a file in


E: WINDOWS LOCAL is copied there. Since existing files will be
overwritten, specify "no" to prevent the contents from being overwritten.
This specification will be ignored if WINST.EXE is started on a personal
computer.
If set to "yes", the language , country code, and keyboard setups are made.
Information about the setup contents follow the scripts in the "Intl" section.
If set to "yes", the drivers will be updated. This process will be executed
according to the setups described in the "Update" section.
Selects whether the mouse cursor is displayed. If set to "yes", VGA_C.DRV
is registered as the display driver. If set to "no", VGA_NC.DRV is registered
in SYSTEM.INI.
On the terminal it is recommended to use a start-up procedure that initiates
an application program together with MS-Windows, instead of using Program
Manager. If set to "yes", the specified application program, instead of
Program Manager, will be registered.
This registration process will follow the setup described in the [Shell] section.
This section is referred when ModifyInternational=yes is specified at the
[Setup] section.
Specifies the country code. From the Setting column of the table shown
below select a value to be placed on the right side of the equation.
Country
Australia australi
Belgium(Dutch) BelgiumD
Brazil Brazil
Canada(French) CanadaF
Finland Finland
Germany Germany
Ireland Ireland
Mexico Mexico
New Zealand NewZea
Portugal Portugal
Spain Spain
Switzerland(French)
SwitzF
Switzerland(Italian)
SwitzI
United Kingdom UK
Specifies the language to be used. From the Setting column of the table
shown below select a value to be placed on the right side of the equation.
Country Kind
Danish Danish
English(American) america
Finnish Finnish
French Canadian FrenchC
Icelandic Icelandi
Norwegian Norwegia
Spanish Spanish
Swedish Swedish
286
Description
Setting Country
Austria
Belgium(French)
Canada(English)
Denmark
France
Iceland
Italy
Netherlands
Norway
South Korea
Sweden
Switzerland (German)
Taiwan
United States
Setting Country Kind
Dutch
English(International)
French
German
Italian
Portuguese
Spanish(Modern) SpanishM
Setting
Austria
BelgiumF
CanadaE
Denmark
France
Iceland
Italy
Nether
Norway
SouthKor
Sweden
SwitzG
Taiwan
US
Setting
Dutch
uk
French
German
Italian
Portugue