Acquisition Of Reboot Reason - Casio IT-2000W Technical Reference Manual

Acquisition of Reboot Reason

Used to acquire the reason the system was rebooted.
SYNTAX
int SYS_GetPowerOnFactor();
INPUT
None
OUTPUT
b0 Power key
b1 Reset button
b2 Alarm
b3 Ring signal
b4 IT-2000 is being set on I/O Box
Note :
If the reset button is pressed the system menu is initiated. This means that an application program
will never acquire the status of "RESET switch being pressed" as the reboot reason.
182