Table of Contents
Advertisement
(4) In the case of VB4, clicking on the "OK" button makes the previous dialog restored.
Make sure that the check box at the right of "PADCTRL.VBX" is checked, then click on the
"OK" button.
Fig. 8.27
With the above procedure registration of the keypad to VB is completed.
(5) The left hand-side figures show the results where a new button
has been added in the lower section of the toolbox. The left one
is an example for VB4, and the right one is an example for
VB3, respectively. If other controls have been registered
already, the left hand-side figures will include more buttons.
This registration is also possible by dragging and dropping the
keypad library icon in the tool box.
Fig. 8.26
205
Fig. 8.25
Advertisement
Chapters
Table of Contents
