Casio IT-2000W Technical Reference Manual page 276

Note:
Besides the detail codes which are defined in File Error (INT24h) above, other error codes may be
returned as fatal error code of DOS.
Protocol Error (File)
0x04 0x00
IrDA Protocol Error (For detail refer to the table on the next page.)
0x80 0x01
0x80 0x02
0x80 0x03
0x80 0x04
0x80 0x05
0x80 0x06
Internal Error
0x0F 0x01
0x0F 0x02
0x0F 0x03
- -
The following error codes are output when an error occurs in the IrDA library.
IrDA Library Error
Termination Code
0X000000001
0X000000002
0X000000004
0X000000008
0X000000010
0X000000020
0X000000040
0X000000080
0X000000100
0X000000200
0X000000400
0X000000800
0X000001000
0X000002000
0X000004000
0X000008000
CANNOT OVERWRITE
IrDA PROTOCOL ERROR
INTERNAL ERROR
RECEIVED ERROR REQUEST
Message
Resources are not enough.
No device to connect.
No service available at the destination device.
Connecting is failed. Timeout to abort or to wait for the
connection.
Opened file is accessed to open.
IR_OPEN is not executed.
Specifying WIRE is illegal.
Parameter error.
Tmeout to wait for send/receive.
Over-run error.
Parity error.
Flaming error.
CS signal timeout.
DR signal timeout.
CI signal timeout.
CD signal timeout.
276
File is "read-only".
Open error.
Data send error.
Data receive error.
Close error.
Error in setting of self-station ability.
Error in setting of communication status.
Parameter error.
Command buffer overflow.
Analysis on received data.
When error notification is received from
the communication partner.
Description