Termination Codes And Messages - Casio IT-2000W Technical Reference Manual

9.6.8 Termination Codes and Messages

In the following table, termination codes and their error messages returned by FLINK.EXE
are described.
Error Code
Category
(High)
Normal End
0x00
0xDC-F5
0xF6
0xF7
0xF8
Protocol Error
0x01
0x01
0x01
0x01
0x01
0x01
0x01
0x01
0x01
File Error (INT21h)
0x02
0x02
0x02
0x02
0x02
0x02
0x02
Note:
Besides the detail codes which are defined in File Error (INT21h) above, other error codes may be
returned as extension error code of DOS.
File Error (INT24h)
0x03
0x03
0x03
0x03
0x03
0x03
0x03
0x03
0x03
0x03
0x03
0x03
0x03
0x03
0x03
Error Message
Detail
(Low)
0x00 NORMAL ENDING


0x00
A ZDRIVE FORMAT NOTICE
0x00 POWER OFF ENDING NOTICE
0x00 RESET ENDING NOTICE
0x00 BREAK KEY INTERRUPT ENDING
0x00 COMMAND ERROR
0x01 COMMAND ERROR
0x02 COMMAND ERROR
0x03 CHECK SUM ERROR
0x04 COMMAND SEQUENCE ERROR
0x05 SEQUENCE NUMBER ERROR
0x06 OTHER PROTOCOL ERROR
0x07 PARAMETER ERROR
0x08 TIMEOUT ERROR
0x02 FILE NOT FOUND
0x03 PATH NOT FOUND
0x0B INVALID FORMAT
0x0F INVALID DISK DRIVE
0x10 CANNOT DELETE DIRECTORY
0x11 NOT SAME DISK
0x12 FILE NOTHING
0x13 WRITE PROTECT ERROR
0x14 UNKNOWN UNIT
0x15 DRIVE NOT READY
0x17 DATA ERROR (CRC)
0x19 SEEK ERROR
0x1A UNKNOWN DISK FORMAT
0x1B SECTOR NOT FOUND
0x1D WRITE ERROR
0x1E READ ERROR
0x1F UNKNOWN ERROR
0x20 FILE SHARE ERROR
0x21 FILE LOCK ERROR
0x22 INVALID DISK CHANGED
0x23 FCB FULL
0x53 FATAL ERROR
Normal end.
Format notification of drives A to Z
Notification of the end of the power.
Notification of the end of reset.
Notification of abortion by user.
Protocol error (undefined function
code)
Protocol error (undefined sub-
function code)
Command cannot be executed.
Check-sum error
Command sequence error.
Sequence number error.
Protocol is illegal.
Parameter error.
Timeout error.
File cannot be found.
Path cannot be found.
Invalid formatting.
Invalid disk.
Delete request is specified to current
directory.
Disk is not the same.
File cannot be found.
Write protect error.
Undefined unit.
Drive is not ready.
Data error.
Seek error.
Disk is not formatted.
Sector cannot be found.
Write error.
Read error.
Error cannot be defined.
Specified file is already opened.
File lock error.
Invalid disk exchange.
FCB is full.
Fatal error (Unsuccess INT24h).
275
Description