Table of Contents
Advertisement
Other parameters
Specify the options immediately after (without inserting a space) the command. Options must be
specified in the following order:
/N
Suppression of message display
Specify this option if a copyright message or error message is suppressed from being
outputted.
/BN Specification of a baud rate (If omitted, 2 (9600 bps) is employed.)
N =
/P
For file transmission via YMODEM protocol this option sets a pathname on the
destination side from the pathname of the object file that exists on the transmission
source. This file name must be specified by its full pathname.
/PXXX
Modifies the pathname of a file to be transmitted via YMODEM protocol.
XXX= path (maximum 250 characters)
/U
With this option if a wild card is used for a file name to be transmitted via YMODEM
protocol, files included in the sub-directory can be the objectives of file transmission.
This option is also used to mirror-copy a drive.
File name
XMODEM: Transmission (/SX) : Specify only one file.
Reception (/RX)
YMODEM: Transmission (/SY) : Specify file names. Multiple files can be specified as a lump.
If specifying multiple files, separate each of them using a space. Wild cards
(*, ?) can be used.
Reception (/RY)
0:
2,400 bps
1:
4,800 bps
2:
9,600 bps
3:
19,200 bps
4:
23,040 bps
5:
28,800 bps
6:
38,400 bps
7:
57,600 bps
8:
115,200 bps
: Specify one file name.
* Multiple files cannot be used.
* Wild cards cannot be specified.
: File name is invalid.
280
Advertisement
Chapters
Table of Contents
