Casio IT-2000W Technical Reference Manual page 138

DeviceName
Sets the device name to be registered as the "DeviceName" of the IAS attribute. A maximum of
sixteen 1-byte characters can be set. The seventeenth and subsequent character will be ignored.
Parameters
Optional character string
Vx.xx (default)
DiscoverCount
Sets up the station specification. If this function is set so it operates on the primary station it
performs discoveries. One discovery will cover six slots. If this function is set so it operates on the
secondary station, it waits for a discovery result from the primary station.
Parameters
0 Operates on the secondary station.
n Operates on the primary station and performs discovery 'n' times. If the 'n'
discovery have been made, it operates on the secondary station.
1 Operates on the primary station and performs only one discovery.
ServiceType
Sets the Wire service type of my station. Multiple parameters can be set at once by concatenation
them using logical sum (OR).
Parameters
1
2
3
4
5
6
7 (default)
Device name for the "DeviceName" attribute
Version number of the IrDA driver
3-Wire-RAW service
3-Wire service
3-Wire-RAW or 3-Wire service
9-Wire service
3-Wire-RAW or 9-Wire service
3-Wire or 9-Wire service
3-Wire-RAW or 3-Wire or 9-Wire service
138