Casio IT-2000W Technical Reference Manual page 246

File Reception (/R)
Function
This function is used to receive a file that exists on the communication partner side by specifying the
request pathname. If the directory specified as the reception directory does not exist on the execution
side, it will be automatically created.
Starting method
argc = number of parameter arguments
int
char* argv[] = { "fl", "/R[Option]", "request pathname" [,"request pathname"],
"reception directory name" }
DoFlink(argc, argv)
Options
Option
O (Overwrite)
R (Recursive call)
Q (Quiet)
H
(HT-to-HT communication)
Request pathname

Specify by its full pathname the file to be received that exists on the communication partner side.

A wild card can be used for the file name.

Multiple request pathnames can be specified.
Reception directory

Specify the storage directory name in which to store the received file.

The directory name must include the drive name.




Enter " " as the delimiter of the directory name.
Example:



"b: "



"b: info



"b: info"
Specification to forced overwrite a read-only file
Transfers all files under the directory specified by the request
pathname.
Non-display of the FLINK output message
Used to perform communication between two handy terminals
(execute the partner-side FLINK with idle start).
(Specification of the root directory)




(Specification of the sub-directory)
test "
(Incorrect specification)
246
Description