Casio IT-2000W Technical Reference Manual page 289

MD G: WINDOWS


COPY E: WINDOWS
If the IrDA interface is used to load COMM.DRV with the following procedure.


COPY E: WINDOWS
COMM.DRV must be stored in the same directory as WINST.EXE. Therefore, in the above
example it is loaded onto the root directory.

Copy the loaded files onto an appropriate directory in the personal computer.


CD C: IT-2000
MD WINDOWS


COPY D: WINDOWS
Load the above mentioned COMM.DRV if using the IrDA interface.


COPY D: COMM.DRV

Now that the objective installation files, such as WINST.EXE and WINST.INF, have been
prepared in the INSTALL directory it is time to initiate WINST.EXE. The directory
configuration at this point in time is as follows:
C:

Execute WINST.EXE to implement the installation.

Use a device such as a PC card to copy the installed WINDOWS directory onto the drive D of
the IT-2000.



LOCAL G: WINDOWS


COMM.DRV G:


INSTALL


*.* WINDOWS



IT-2000
WINST.EXE
WINST.INF
COMM.DRV
SYSCALL.DL


WINDOWS
SYSTEM.INI
WIN.INI
.....
Fig. 9.5
289


As required