AGFA DX-G User Manual page 57

Color Constant/
Flashing
Blue Constant
Flashing
Green Constant
Flashing
Red Constant
Flashing
Status
Activating the era-
sure cycle.
Proceeding with the
erasure cycle.
Stand-by mode
(READY).
Busy with scanning
and transporting cas-
sette and image
plate.
Service mode
Fatal error
• Warm up / Self-
test
• Processing Soft-
ware down
• Error
DX-G, DX-M | Getting started | 57
Action
Enter cassettes into the input
buffer for erasing.
Remove cassettes from the out-
put buffer.
Enter cassettes into input buffer
for scanning.
Remove cassettes from output
buffer.
Check digitizer touch panel and
workstation display for further
information and detailed in-
structions.
Contact an Agfa certified service
engineer.
Check digitizer touch panel and
workstation display for further
information and detailed in-
structions.
2321G EN 20181126 1428