AGFA DX-G User Manual page 42

42 | DX-G, DX-M | Introduction
4. Open the right side door and locate the air-filter element inside the door
opening.
5. Release the 2 clamps (1) to be able to remove the air filter frame (2).
6. Remove the old air-filter element (3).
7. Take-out the new air-filter element.
Contact your Agfa representative to order the air-filter element.
AGFA ordering code: CM+ 9.5170.9855
8. Mount the air-filter element inside the rights side door as illustrated
below.
2321G EN 20181126 1428
1 3 2