Basic workflow using a CR cassette
Topics:
•
Step 1: retrieve the patient info
•
Step 2: Select the exposure
•
Step 3: Prepare the exposure
•
Step 4: Check the exposure settings
•
Step 5: Execute the exposure
•
Step 6: repeat steps 2 to 5 for the next subexposures
•
Step 7: digitize the image
•
Step 8: perform a quality control
Note: Using an ID Tablet to identify cassettes before the exposure
will break the communication of X-ray parameters between the NX
workstation and the X-ray generator console. It is advised to
identify cassettes after the exposure, as described in this workflow.
DX-D 600 | Getting Started with DX-D 600 | 69
0240H EN 20181119 0940