Options And Accessories; Anti-Scatter Grids - AGFA DX-D 600 User Manual

34 | DX-D 600 | Introduction to the DX-D 600

Options and Accessories

Accessories for DX-D 600:
• DX Full Leg Full Spine Stand (for the DX-D Full Leg Full Spine application
using the RAD Wall Stand)
• DX FLFS Horizontal Overlay (for the DX-D Full Leg Full Spine application
using the RAD Table)
• Three-field template for projecting the location of the AEC ionization
chambers on the object to be exposed. The three-field template is available
for the SID range 110 cm - 130 cm. The three-field template is slidden into
the rails of the collimator.
• The system is delivered with a set of labels. When using multiple DR
Detectors, on the labels a nickname is written to identify the DR Detector.
An identical label is attached to the bucky of the X-ray system to identify
the dedicated workspace of each DR Detector.
For information on options and accessories, refer to these manuals:
• DX-D 600 X-Ray System User Manual, document 0242.
• User manuals for the supported DR Detectors.

Anti-scatter grids

Anti-scatter grids are used to reduce scattered radiation and improve image
quality. Grids are available as an option.
Refer to the Agfa website for specifications on the anti-scatter grids that have
been found compatible with the system and the DR Detectors.
http://www.agfahealthcare.com/global/en/library/overview.jsp?ID=54332498
0240H EN 20181119 0940