Step 2: Select The Exposure - AGFA DX-D 600 User Manual

62 | DX-D 600 | Getting Started with DX-D 600

Step 2: Select the exposure

In the operator room at the NX workstation:
1. Select the thumbnail for the exposure in the Image Overview pane of the
Examination window.
The selected DR Detector is activated. The DR Detector Switch shows
which DR Detector is active and shows its status.
The default X-Ray exposure parameters for the selected exposure are sent
to the modality and displayed on the software console.
The default X-Ray system position for the selected exposure is sent to the
modality and displayed on the software console, for automatic positioning
of the X-Ray system.
0240H EN 20181119 0940
RAD Table DR with integrated DR Detector
RAD Wall Stand DR with integrated DR Detector
RAD Table DR with portable DR Detector in the DR bucky
RAD Wall Stand DR with portable DR Detector in the DR
bucky
Free exposure using portable DR Detector