AGFA DX-D 600 User Manual page 53

DX-D 600 | Introduction to the DX-D 600 | 53
WARNING:
There is a risk of collision or crushing for patients, operating
staff, unit and objects, caused by unit movements which could
be released by inadmissible actuation of operating elements by
patients.
WARNING:
To move the tabletop, hold it by putting your hands on top of it.
To avoid risk of injuries in hand or fingers during tabletop
movement, do not hold the tabletop by gripping it at the side.
WARNING:
If the X-Ray tube is positioned for exposure on a vertical
detector and the collimator is rotated, collision between the
collimator and the telescopic column of the ceiling suspension
can occur when raising the X-Ray tube. Make sure to center the
collimator before moving the tube-collimator assembly
upwards.
WARNING:
If during movement of the ceiling suspension an accelerated
movement is noticed, release the button/pedal immediately to
stop the unit and please notify your local service organization or
dealer at once.
CAUTION:
Strictly observe all warnings, cautions, notes and safety
markings within this document and on the product.
CAUTION:
Avoid unnecessary dose by checking before exposure if the DR
Detector Switch displays the name of the DR Detector that is
being used and if the status of the DR Detector is ready for
exposure.
CAUTION:
The maximum load for the bucky movement in vertical direction
is 20 kg. The bucky may slip downwards when applying
excessive load.
CAUTION:
Excessive ambient temperature may impact performance of DR
Detectors and cause permanent damage to the equipment. Refer
to the related user manual for environmental conditions for the
DR detector. If ambient temperature and humidity is outside the
specified range, do not operate the system or use air
conditioning. Warranty will be void if it is obvious that
operating conditions are not met.
0240H EN 20181119 0940