Table of Contents
Advertisement
• The Drive status icons (
• The Message display area (
Login Screen
All library functions require the user to login. When the library is powered ON, the
library undergoes hardware and software initialization, and conducts a tape
inventory of the cartridge magazines and tape drives. This process can take several
minutes. The login screen is displayed when the inventory is complete.
Figure 4-3. Login screen
To login:
1. Press the Enter control key to display the User Login password screen.
Figure 4-4. Login password screen
2. Enter the 4-character password for the tape library.
Figure 4-5. Top menu screen
currently in the tape drive.
messages, user prompts, and error messages.
The factory default password is 0000. The password can be changed in the
[Configuration] menu, but cannot be eliminated entirely.
When the password is entered successfully, the Operator Panel top menu screen
is displayed.
in Figure 4-2) indicate whether a tape cartridge is
4
in Figure 4-2) is used to display Accessor status
5
Chapter 4. Operator Panel and Web User Interface
4-3
Advertisement
Table of Contents
