Applying A Rid Tag To A Library; End Of Call; Rid Tag Placement - IBM System Storage TS3400 Tape Library Maintenance Information

Applying a RID Tag to a Library

A RID (Repair Identification) Tag maintains the original serial number record and
WWN of the machine to ensure that your warranty coverage, if applicable, is not
interrupted. The tag is important for customer inventory accuracy. Follow the
instructions on the RID tag precisely.
Figure 7-24. RID tag placement
1. Copy the machine type (MT) and serial number (SN) from the old library onto
2. Copy the Worldwide Name (WWN) from the old library onto the WWN ID label
3. Place the RID tag close to, but not covering, the serial number on the new library

End of Call

1. If any cartridges were removed from the library, give them to the customer.
2. Record your activity in Chapter 10, "History of Service Activity," on page 10-1.
3. Return control of the library to the customer.
7-26
TS3400 Tape Library Maintenance Information
3
the Repair ID tag ( in Figure 7-24).
1
( in Figure 7-24).
2
( in Figure 7-24). Repeat for the WWN ID label.
3
2
1