Web User Interface Error Messages; Web User Error Messages - IBM System Storage TS3400 Tape Library Maintenance Information

Table 1-2. Drive error codes (continued)
Code (H) Description
A Loop ID setup of Drive
0321
#2 failed.
Drive #2 is in Prevent
Cartridge Removal state,
0322
disabling cartridge
removal.

Web User Interface Error Messages

Table 1-3. Web user error messages
Title
Error "***" modification failed.
Users full.
You cannot remove yourself.
Parameter Error Login failure.
Unsupported update file.
Invalid parameter found in [***].
Please input parameter of [***].
Password parameter error.
User name parameter error.
Not enough role.
User name unmatched.
User already exists.
Users full.
Flush ROM write error detected.
User information access failure.
Panel
indication
1. Confirm the drive connection.
2. Verify the drive port configuration (Web User Interface:
Configure Library → Physical).
3. Cycle the power and try again.
4. Replace the drive canister (page 9-11).
CHK 0321
5. Replace the Drive Docking Card (page 9-19).
6. Replace the Library Control Blade (page 9-8).
7. Replace the Back Board assembly (page 9-37).
8. Replace the TS3400 Tape Library chassis (page 9-44).
1. Release the Drive #2 Prevent Medium Removal state from
the host.
2. Cycle the power and try again.
3. Replace the drive canister (page 9-11).
CHK 0322
4. Replace the Drive Docking Card (page 9-19).
5. Replace the Library Control Blade (page 9-8).
6. Replace the Back Board assembly (page 9-37).
7. Replace the TS3400 Tape Library chassis (page 9-44).
Message
Action Required
Issuing Panel
*** Setting
Users
Users
Login
Firmware Update
*** Setting
*** Setting
Users
Users
Users
Users
Users
Users
Users
Users
Chapter 1. Start Service
1-17