Table of Contents
Advertisement
To check the library status:
1. Log into the Operator Panel.
2. Press the Down button to select Service Mode, and press Enter.
3. Press the Down button to select Error Status, and press Enter.
4. If an error occurs, press the Enter button to display specific error information.
Checking the Error Log
Figure 7-3. Error log menu
Use Service Mode → Error Log to check the error log stored in the library on the
Library Control Blade.
To check the error log:
1. Log into the Operator Panel.
2. Press the Down button to select Service Mode, and press Enter.
3. Press the Down button to select Error Log, and press Enter.
4. If an error has occurred, press the Down button to select an error, and press Enter
Checking Mechanical Movement Statistics
Figure 7-4. Statistics menu
Use Service Mode → Statistics to check and reset the accumulated count of each
operation of the Accessor assembly.
To check and reset movement count statistics:
1. Log into the Operator Panel.
2. Press the Down button to select Service Mode, and press Enter.
3. Press the Down button to select Statistics, and press Enter.
7-4
TS3400 Tape Library Maintenance Information
• Accessor — Checks the error status of the Accessor.
• Drive 1 — Checks the error status of Drive 1.
• Drive 2 — Checks the error status of Drive 2.
You can check the meaning of error codes in "Error Codes" on page 1-5.
Service Mode
Error Log
to display specific error information. You can check the meaning of error codes in
"Error Codes" on page 1-5.
Service Mode
Statistics
View Accessor
View Retry
View Error
Clear Accessor
Clear Picker
Clear Retry
Clear Error
Advertisement
Table of Contents
