Chapter 7 Menu Description Tables; Menu Configfation - Panasonic AJ AJ-HDX900 Operating Instructions Manual

Chapter 7 Menu description tables

7-1 Menu configuration
MENU
USER MENU
MAIN MENU
OPTION MENU
OPTION
How to open the menus
USER MENU:
Press MENU button to display.
MAIN MENU:
Hold down MENU button for 3
seconds or more to display.
OPTION MENU:
Press MENU button
holding down LIGHT button to
display.
<Notes>
≥ There is a total of 42 camera-related items on three pages (14 items per page) and 14 VTR-related items on one page
which can be set.
≥ The items with the shading cannot be selected using <USER MENU SELECT>.
≥ The items with the underlining can be selected only using <USER MENU SELECT> on condition that all the items
(equivalent to the number of items on one page) are selected together. Individual items cannot be selected.
How to interpret the menu lists
The following abbreviations indicate whether the menu changes are stored
(written) in the corresponding data or loaded (read) from the data.
The changes cannot be stored or loaded when "/" is indicated.
S: The changes can be stored or loaded as scene file data.
C: The changes can be stored or loaded using CARD READ/WRITE.
U: The changes can be stored or loaded as user data.
Refer to sections "7-6-4 SCENE" and "7-6-5 INITIALIZE."
F: The changes can be stored or loaded as READ FACTORY DATA.
Refer to section "7-6-5 INITIALIZE."
R: The changes can be stored or loaded using RC DATA SAVE.
Refer to section "5-10 Connection of the remote control unit (AJ-
RC10G)."
Items selected in <USER MENU SELECT>
SYSTEM SETTING
PAINT
VF
OPERATION
FILE
MAINTENANCE
VTR MENU
USER MENU SELECT
while
RB GAIN CONTROL
RGB BLACK CONTROL
MATRIX
COLOR CORRECTION
LOW SETTING
MID SETTING
HIGH SETTING
ADDITIONAL DTL
SKIN TONE DTL
KNEE/LEVEL
GAMMA
CAMERA SETTING
CAMERA ID
SHUTTER SPEED
SHUTTER SELECT
USER SW
SW MODE
WHITE BALANCE MODE
USER SW GAIN
LENS IRIS
SYSTEM CHECK
DIAGNOSTIC
LENS ADJ
BLACK SHADING
WHITE SHADING
LENS FILE ADJ
SYSTEM(USER)
PAINT(USER)
VF(USER)
OPERATION(USER)
FILE(USER)
MAINTENANCE(USER)
VTR(USER)
Variable
Item
range
SYSTEM MODE 1080-50i For setting the system frequency and the
1080-59.94i recording format of the unit.
720-50P When this item is switched, turn "OFF" the
720-59.94P POWER switch on the unit and then turn it
"ON" again.
C U F
This column indicates the Described in this column are the
variable range in which the operations which can be expected to
item can be set and the result when the item's settings are
choice of the settings which selected.
can be selected for the item.
SYSTEM MODE
REC FUNCTION
OUTPUT SEL
VIDEO OUT SETTING
MONITOR OUT SETTING
RC OUT SETTING
DOWNCON SETTING
GENLOCK
OPTION MODE
VF DISPLAY
VF MARKER
VF USER BOX
VF INDICATOR1
VF INDICATOR2
MODE CHECK IND
!LED
CARD READ/WRITE
CARD R/W SELECT
LENS FILE
LENS FILE CARD R/W
SCENE
INITIALIZE
VTR FUNCTION
BATTERY/TAPE
BATTERY SETTING1
BATTERY SETTING2
MIC/AUDIO 1
MIC/AUDIO 2
TC/UB
UMID SET/INFO
VTR DIAG
Remarks
101
7