Error Codes; Emergency Eject - Panasonic AJ AJ-HDX900 Operating Instructions Manual

Chapter 6 Maintenance and inspections

6-3-2 Error codes

One of the following error codes appears in the display
window when an error has occurred in the unit for some
reason.

6-3-3 Emergency eject

If the cassette cannot be ejected by pressing the EJECT button, use a screwdriver or similar tool to press and turn the
emergency eject screw. This enables the cassette to be removed.
1
Set the power to OFF.
2
Remove the rubber cap where shown in the figure.
Insert a Phillips head screwdriver into the cross-shaped
part of the emergency eject screw (red).
3
While pushing in with the screwdriver, turn the
emergency eject screw counterclockwise until the tape is
ejected.
≥ This screw needs to be rotated through about 20 turns
after the first turn until the unloading can be started.
≥ It also needs to be rotated through about 90 turns after
the first turn until the tape is ejected.
4
Remove the cassette.
5
Return the rubber cap to its original position.
<Notes>
≥ Do not turn the emergency eject screw except in an
emergency.
≥ Do not turn the screw clockwise. Stop turning the
screw as soon as the tape is ejected. Otherwise, the
mechanism may be damaged.
≥ After the tape is ejected, the cassette holder will not lock
into place even when an attempt is made to close it. Be
sure to turn the power off and turn it back on to reset the
mechanism's operation, and then close the cassette
holder.
≥ A clicking sound will be heard when the emergency eject
screw is turned: this sound is made by the reel drive
operation and is therefore not indicative of a malfunction.
100
(continued)
Code No.
E-04 Pinch solenoid problem
E-08 Cleaning solenoid problem
E-0B Supply reel problem
E-0C Take-up reel problem
E-0D Capstan problem
E-0E Cylinder problem
E-0F Loading problem
E-38 Servo transmission problem
E-3F Camera transmission problem
E-6F Reference signal problem
E-11 Video initialization problem
E-50 System format problem
O Turn the power supply on again.
E-92 Something is wrong with the DVCPRO connector
connection.
Cassette holder
2, 5
Description of error
Emergency
eject screw
3
Push in and turn at
the same time.