Panasonic AJ AJ-HDX900 Operating Instructions Manual page 81

Chapter 5 Preparation
Using the NP-1 type battery pack
CAUTION:
These servicing instructions are for use by qualified
service personel only. To reduce the risk of electric
shock, do not perform any servicing other than that
contained in the operaiting instructions unless you
are qualified to do so.
1
Remove the battery holder.
2
Attach the NP-1 type battery case to the unit.
1 Tighten the mounting screws.
2 Tighten the power contact screws.
3 Insert the top of the detached cover in the direction
shown by the arrows.
4 Align the holes in the bottom of the cover (metal part)
with the holes at the bottom of the case, and use the
screws to attach the case.
<Note>
When mounting the battery holder, take care not to pinch
the connecting cord.
NP-1 type Battery case
4
2
Using the V-mount type battery pack
Attach the V-mount adapter plate.
Insert it in the direction shown by the arrows, and slide it into
place.
(continued)
3
1
3
Set the battery type.
Select the battery type using the BATTERY SELECT
menu item. This item is selected from the
<BATTERY/TAPE> screen on the VTR FUNCTION
page.
When using another battery which cannot be selected
using the BATTERY SELECT item setting, select TYPE
A or TYPE B, and set the items that correspond to the
characteristics of the battery.
For details, refer to "7-8-4 BATTERY SETTING2."
<Note>
Address all inquiries concerning the V-mount adapter
plate to your dealer.
5
81