Menu Description Tables - Panasonic aj-HPX2000p Operating Instructions Manual

Menu Description Tables

SYSTEM SETTING
SYSTEM MODE
Items/ Adjustable
Data Saved Range
SYSTEM 1080-59.94i For setting the system frequency and the
recording format of the unit.
MODE 1080-50i
When this item is switched, turn "OFF"
720-59.94P
the POWER switch on the unit and then
720-50P
turn it "ON" again.
480-59.94i
Notes
576-50i
When the remote control unit (AJ-
RC10G) is connected, this item is not
displayed.
To switch this item, operate the main
unit independently.
When the time code is in free run
mode and a change is made to the
SYSTEM MODE menu option, the
time may not be correctly recorded.
After turning on the camera-recorder,
check the time code and make a
change to the setting if required.
When USB DEVICE mode is selected,
no change can be made to this option.
– C U F –
REC SIGNAL CAM Select video input signals.
VIDEO CAM Record the signal from the
camera
1394
VIDEO:Record the signal from the
SDI
GENLOCK IN connector (In SD
mode only ）
1394: Record the signal from the 1394
input connector
SDI: Records input to the SDI IN
connector (optional).
Notes
After the power has been turned OFF,
this setting defaults to CAM when the
power is turned ON again.
In order to select VIDEO and
synchronize video signals input to the
GENLOCK IN connector (VBS) with
the unit, set the GENLOCK item of
[ GENLOCK ] (page 145) to "EXT".
– C U F R
CAMERA (1080-59.94i For setting the video system for
MODE /480-59.94i) shooting.
60i
30P
24P
24PA
(1080-50i
/576-50i)
50i
25P
(720-59.94P)
60P
30P
24P
(720-50P)
50P
– C U F R
25P
16:9 Select the aspect ratio for recording. (In
ASPECT
4:3
SD mode only ）
16:9: Record in <16:9> aspect ratio.
4:3: Record in <4:3> aspect ratio.
– C U F R
Remarks
Data Saved
VF TYPE
– C U F R
REC MODE
– C U F R
SETUP
– C U F R
PC MODE
SELECT
– – – F –
PC MODE
– – – F –
The ____ in the Adjustable Range column indicates the
preset mode.
Items/ Adjustable
Range
HD Specify the type of viewfinder to be
attached to the camera-recorder.
SD
DVCPRO50 Select the recording mode. (In SD mode
only ）
DVCPRO
DVCPRO50:
DV
Record in DVCPRO50 format.
DVCPRO:
Record in DVCPRO format.
DV: Record in DV format.
0% Switch the setup. (For 480-59.94i only ）
0%: Setup is switched to 0% for both
7.5%A
the camera output and the
recording.
7.5%A: Setup is switched to 7.5% for the
camera output and 0% for the
recording.
USB HOST Specify the operation mode of the
camera-recorder when an external
USB DEV.
device is connected via USB.
USB HOST:
Sets the camera-recorder to the mode
that allows an external hard disk drive
to be connected.
USB DEV.:
Sets the camera-recorder to the USB
device mode, which allows a PC to be
connected via USB 2.0 for use with
P2 cards as mass storage.
Note
When the PC MODE menu option is set
to ON, no change can be made to this
option.
ON Used to enable or disable the mode that
OFF allows the camera-recorder to be
connected to a PC or an external hard
disk drive via USB 2.0.
ON: Sets the camera-recorder to the
mode selected through the PC
MODE SELECT menu option.
OFF: Disables the PC MODE for normal
operation.
Note
Once the power is turned off, the option
is always set to OFF when the power is
turned on next time.
Menu : Menu Description Tables
Remarks
141