Panasonic AJ-HDC27HP Menu Information

Panasonic camcorder menu information
Hide thumbs Also See for AJ-HDC27HP:

Advertisement

Quick Links

Panasonic Broadcast
AJ-HDC27HP
Menu Information

Advertisement

Table of Contents
loading

Summary of Contents for Panasonic AJ-HDC27HP

  • Page 1 Panasonic Broadcast AJ-HDC27HP Menu Information...
  • Page 2: Menu Operations

    Menu operations The setting menu operations are performed using the MENU button and JOG dial button. configuration is divided into the camera unit’s setting menus and VTR unit’s setting menus. It is possible to select the engineer menu which enables all the setting menu items to be set or, alternatively, the user menu which consists of individually tailored menus so that only those menus which will be used most frequently can be set.
  • Page 3: Basic Setting Menu Operations

    Menu operations (continued) Basic setting menu operations Displaying menus User menu: Press the MENU button. The camera unit’s USER menu screen is displayed. When the MENU button is pressed again, the VTR unit’s USER menu screen is displayed. Press the MENU button.
  • Page 4 Menu operations (continued) Displaying sub-menus and deciding on settings Operations common to the user menu and engineer menu Turn the JOG dial button while the USER menu screen or MAIN menu screen is displayed. The cursor ( n ) moves to the SUB menu item. Example: Turn the JOG 2222...
  • Page 5: Setting Menu Configuration

    Setting menu configuration FILM (CAM) MAIN MENU 1 } MATRIX TABLE MATRIX COLOR CORRECTION 1 COLOR CORRECTION 2 LOW SETTING } MASTER GAIN MID SETTING } MATRIX TABLE } COLOR CORRECT HIGH SETTING } ADDITIONAL DTL1 ADDITIONAL DTL2 SKIN TONE DTL KNEE/LEVEL } MANUAL KNEE } WHITE CLIP...
  • Page 6 Setting menu configuration FILM (CAM) MAIN MENU 2 VF DIAPLSY DISP CONDITION DISP MODE VF OUT VF DTL ZEBRA1 DETECT ZEBRA2 DETECT ZEBRA2 LOW LIGHT LVL SYNCHRO SCAN DISP. ECU MENU DISP. VF MARKER SAFETY ZONE CENTER MARK FRAME SIG VF INDICATOR EXTENDER SHUTTER...
  • Page 7 Setting menu configuration FILM (CAM) MAIN MENU 4 FILM (CAM) USER MENU SELECT1 FILM (CAM) USER MENU SELECT2 FILM (CAM) USER MENU SELECT3 BLACK SHADING WHITE SHADING FLARE COLORIMETRY INITIALIZE DIAGNOSTIC EVALUATION OPTION How to interpret the menu lists The following abbreviations indicate whether the menu changes are stored (written) in the corresponding data or loaded (read) from the data.
  • Page 8 Setting menu configuration VTR MAIN MENU FUNCTION BATTERY/TAPE BATTERY SELECT EXT DC IN SELECT BATT NEAR END ALARM BATT NEAR END CANCEL BATT END ALARM BATT REMAIN FULL TAPE NEAR END ALARM TAPE NEAR END TIME TAPE END ALARM TAPE REMAIN/$ BATTERY SETTING MONITOR MARKER SAFETY ZONE...
  • Page 9: Setting Menu Screens

    Setting menu screens The main menu consists of FILM (CAM) MAIN MENU (1 to 4) of the camera and the VTR MAIN MENU of the VTR. These screens are index screens which are used to open the sub-menus. The setting menu is operated with the MENU button and JOG dial button.
  • Page 10: Rop Screen

    Setting menu screens ROP screen The ROP (Remote Operation Panel) is set on this screen. Variable Item range display MASTER PED –200 USER MASTER PEDESTAL level setting. (FILM MENU) +000 (CAM MENU) +018 +200 (Max.) S C U F E MASTER DTL –31 USER...
  • Page 11: Color Correction 1 Screen

    Setting menu screens COLOR CORRECTION 1 screen The camera color saturation adjustments and hue adjustments are set on this screen. Variable Item range display R (SAT) –63 Color saturation R (PHASE) adjustment and hue adjustment: red S C U F E Mg (SAT) –63 Color saturation...
  • Page 12: Low Setting Screen

    Setting menu screens LOW SETTING screen The low level gain is set on this screen. Variable Item range display ∫ MASTER –3dB USER –3 dB, 0 dB, 3 dB, 6 dB, 9 GAIN dB, 12 dB, 18 dB, 24 dB or 30 dB can be set.
  • Page 13: High Setting Screen

    Setting menu screens HIGH SETTING screen The high level gain is set on this screen. Variable Item range display ∫ MASTER –3dB USER –3 dB, 0 dB, 3 dB, 6 dB, 9 GAIN dB, 12 dB, 18 dB, 24 dB or 30 dB can be set.
  • Page 14: Skin Tone Dtl Screen

    Setting menu screens SKIN TONE DTL screen The skin tone detail of the camera is set on this screen. Variable Item range display ∫ SKIN TONE DTL ON USER For setting the skin tone detail to ON or OFF. S C U F E ∫...
  • Page 15: Camera Setting Screen

    Setting menu screens GAMMA screen The gamma settings of the camera are performed on this screen. Variable Item range display MASTER 0.35 USER For setting the master GAMMA gamma when the unit is to (FILM MENU) 0.45 be operated in the film mode.
  • Page 16: Vf Display Screen

    Setting menu screens VF DISPLAY screen The information to be displayed inside the viewfinder is set on this screen. Variable Item range display DISP NORMAL USER NORMAL: CONDITION HOLD HOLD: S C U F E DISP MODE USER FILTER GAIN AUTO KNEE SW SHUTTER ABB STATUS...
  • Page 17: Vf Marker Screen

    Setting menu screens VF MARKER screen The information to be displayed inside the viewfinder is set on this screen. Variable Item range display SAFETY ZONE USER For selecting the safety zone display. 1 : 80% and 90% corner 2 : 80% corner display 3 : 90% corner display 4 : 80% and 90% box 5 : 80% box display...
  • Page 18: Camera Id Screen

    Setting menu screens CAMERA ID screen The camera ID is set on this screen. Variable Item range display ID 1: For inputting the camera 2222222222 ID (max. 10 characters). <Note> ID 2: Select whether this setting 2222222222 is to be mixed by selecting ID 3: ON or OFF for CAMERA 2222222222...
  • Page 19: Shutter Select Screen

    Setting menu screens SHUTTER SELECT screen A shutter speed is set in each POSITION item on this screen. Variable Item range display SYNCHRO 90.0 deg For selecting the shutter SCAN 2 speed which is to be set in 180.0 deg SYNCHRO SCAN 2.
  • Page 20: Led Screen

    Setting menu screens ! LED screen The display of the lamp which appears inside the viewfinder is set to ON or OFF on this screen. Variable Item range display GAIN (0 dB) USER For setting whether the lamp is to be turned on when the gain level is other than 0 dB.
  • Page 21 Setting menu screens CAMERA SW MODE screen Variable Item range display USER1 SW USER For allocating the functions (FILM MENU) in USER1 button. (CAM MENU) S.GAIN <Notes> OWhen B.STR has been S.IRIS S.BLK B.STR AUDIO CH1 AUDIO CH2 REC SW OWhen Y GET has been Y GET RET SW...
  • Page 22: Super Gain Screen

    Setting menu screens SUPER GAIN screen The gain allocated to the SUPER GAIN switch is set on this screen. Variable Item range display S. GAIN VALUE 18dB USER For selecting the gain 24dB when the SUPER GAIN 30dB switch is pressed. 36dB S C U F E The underlining in the variable range column indicates the setting in...
  • Page 23 Setting menu screens CAM CARD READ/WRITE screen The settings for saving (writing) the menu data on the SD memory card, loading (reading) the data from the card, and configuring the card are performed on this screen. Variable Item range display SELECT USER For selecting the number...
  • Page 24: Lens File Screen

    Setting menu screens LENS FILE screen The lens files are stored into the unit’s internal memory and read from the memory on this screen. The white shading data and flare adjustment data are stored together as a lens file. Variable Item range display...
  • Page 25: Lens Adj Screen

    Setting menu screens LENS ADJ screen The lens adjustments are performed on this screen. Variable Item range display F2.8 ADJ For outputting the voltage output only when ON is selected as this item’s setting. F16 ADJ For outputting the voltage output only when ON is selected as this item’s setting.
  • Page 26 Setting menu screens FILM (CAM) USER MENU SELECT 1, 2 and 3 screens The settings for registering the items (the same as the ones on the FILM or CAM MAIN MENU 1, 2 and 3 screens) allocated to the SUB menus to the SUB MENU screen are performed on this screen. Registration ON (¢) or OFF (≥) is set at the head of each item.
  • Page 27: Black Shading Screen

    Setting menu screens BLACK SHADING screen The black shading adjustments are performed on this screen. Variable Item range display DETECTION For execution of the digital shading compensation. CORRECT (DIG) ON For setting the digital shading compensation to ON or OFF. S C U F E WHITE SHADING screen The white shading adjustments are performed on this...
  • Page 28: Option Screen

    Setting menu screens DIAGNOSTIC screen The usage statuses and software versions are displayed on this screen. Variable Item range display CAMSOFT (IN) For displaying the version of the software for the built-in flash memory. CAMSOFT (OUT) For displaying the version of the software for the external flash memory.
  • Page 29 Setting menu screens OPTION screen Variable Item range display SYSTEM FREQ. 59.94Hz For setting the unit’s frame 60.00Hz frequency. U F E EVF SEL MONO The EVF terminal video COLOR signal will be switched. MONO: COLOR: U F E SUPER DTL For selecting the kind of detail to be provided.
  • Page 30 Setting menu screens OResolution measurement screen The resolution measurements are performed on this screen. Variable Item range display RESOLUTION For setting the resolution measurement. DETAIL For setting the DETAIL to ON or OFF. H-F COMPE. For setting the high- frequency compensation to ON or OFF.
  • Page 31: Vtr Main Menu Screen

    Setting menu screens VTR MAIN MENU screen SUB menu display FUNCTION Index for opening the FUNCTION screen. BATTERY/ Index for opening the BATTERY/TAPE TAPE screen. BATTERY Index for opening the BATTERY SETTING SETTING screen. VTR VF Index for opening the VTR VF INDICATOR INDICATOR screen.
  • Page 32: Function Screen

    Setting menu screens FUNCTION screen The VTR’s functions are set on this screen. Variable Item range display NEWS REC USER For selecting the VTR MODE START button acknowledgment time during recording. OFF: 0.2—2.0: C U F HUMID OPE USER For selecting the VTR operation when condensation has formed.
  • Page 33 Setting menu screens BATTERY/TAPE screen Select the settings which match the type of battery used on this screen. The warning tone which signals the remaining battery charge and remaining tape and which is heard during shooting can be switched off if they prove to be distracting.
  • Page 34: Battery Setting Screen

    Setting menu screens BATTERY SETTING screen The type of battery to be used is selected and its settings are performed on this screen. Variable Item range display AJ-BP490 MANUAL For setting the AJ-BP490 AUTO and the PACO HP-90A battery. C U F AU-BP402 MANUAL For setting the AU-BP402...
  • Page 35: Vtr Vf Indicator Screen

    Setting menu screens VTR VF INDICATOR screen The information to be displayed in the viewfinder is set on this screen. Variable Item range display TAPE (IND) USER For switching the remaining tape display to ON or OFF. C U F BATTERY (IND) USER For switching the battery...
  • Page 36 Setting menu screens MIC/AUDIO screen Variable Item range display MIC LOWCUT FRONT USER For setting the high-pass REAR filter for the CH1 mic input. F&R FRONT:The high-pass filter REAR: The high-pass filter F&R: OFF: C U F MIC LOWCUT FRONT USER For setting the high-pass REAR...
  • Page 37 Setting menu screens TC/UB screen The time code and user bits settings are performed on this screen. Variable Item range display TC MODE USER For setting the time code to the DF or NDF mode. DF : The time code is set NDF : The time code is set <Note>...
  • Page 38 Setting menu screens TC/UB screen The time code and user bits settings are performed on this screen. Variable Item range display P. OFF LCD USER For setting whether the DISPLAY LCD display is to appear when the power is OFF. ON : The LCD display OFF : The LCD display The power-saving mode is...
  • Page 39: Time Date Screen

    Setting menu screens TIME DATE screen The time/date settings are performed on this screen. Variable Item range display YEAR 00—05—99 For setting the year. MONTH 1 — 12 For setting the month. 1 — 31 For setting the day. HOUR 0 —...
  • Page 40: Vtr User Menu Select

    Setting menu screens ON (¢) or OFF (≥) is set on this screen to determine which items are to be registered on the USER MENU screen. The maximum number of VTR unit items which can be registered is 14. FUNCTION screen Variable Item range...
  • Page 41 Setting menu screens ON (¢) or OFF (≥) is set on this screen to determine which items are to be registered on the USER MENU screen. The maximum number of VTR unit items which can be registered is 14. VTR VF INDICATOR screen Variable Item range...

Table of Contents